Build a traditionally constructed, rubber powered, free flight model of a P-51D Mustang factory serial number 44-13557 as delivered to 355th fighter group based at Steeple Morden, England circa July 1944 using the traditional method of stick and tissue, that consists of a built up balsa wood skeleton (framework), covered with a tissue skin, using a plan that is printed at the exact scale of the model. Power is provided by rubber strip motor that is wound up before flight. In the spirit of the traditional kits, profiles have been simplified and adjusted from the original and a relatively large propeller used. These adjustments have been done with care and sensitivity so that the shape and spirit of the original aircraft is preserved as much as possible. Also in the spirit of the traditional kits, additional items required are things that can be found in the kitchen drawer or are easily available on the high street. KIT CONTENTS 3 x balsa sheets with precise laser cut parts and strip wood, PVA glue for building the wooden frames. 1 x 150mm diameter plastic propeller, 1 x pre-bent motor hook and shaft, 1 x vacuum formed canopy and spinner, 3 x low friction plastic nose bushings - one for the propeller and two for the undercarriage wheels, 1 x vacuum formed canopy and spinner, Piano wire for the main undercarriage and tail wheel legs, 1 x motor peg and 2 x exhaust stubs (cocktail sticks or toothpicks), Rubber motor strip, Tissue to cover the model, Parts reference sheet (W), full size summary plan sheet (X), scheme diagram sheet (Y) and scheme markings (Z) printed on lightweight paper.